Jieli Scm 100% Original Authentic Changeover MCB

• Breaking Capacity: Low Voltage Circuit Breakers
• Operation: Manual Type
• Speed: High-Speed Circuit Breaker
• Arc-extinguishing Medium: Air
• Installation: Fixed
• Structure: MCB
• Model NO.: CMT
• Poles Number: 1-4
• Type: Circuit Breaker
• Function: Circuit-Breaker Failure Protection
• Certification: TUV
• Transport Package: Packing
• Specification: Fireproof material
• Trademark: no
• Origin: China

Product Description

1. Model number: CMT11-1.
2. Material property: copper parts + silver contact + flame retardant housing.
3. Product performance standard: BS EN 60947-3.

Rated current In	1A-63A
Pole  number	1P  2P.  3P,  4P
Rated voltage Ue	AC  230/400V
Rated frequency	50/60Hz
Rated breaking capacity	7.5 KA
Running breaking capacity	7.5 KA
Rated shock withstand voltage	4 KV
Power dissipation per pole	1A-10A:2W
	16A-32A:3.5W
	40A-63A:5W
Tripping characteristic	B.C.D
Mechanical life	8000 times
Electrical life	4000 times
Protection level	IP20
Fiducial temperature	30
Ambient  temperature	-5 to +40
Storage temperature	-35  to+70
Resistance to damp heat	2 types(temperature 55,relative humidity 95%)
Installation type	Modular structure, Rail mounted
Terminal wiring capability	25mm2
Terminal connection type	Cable/Pin-type busbar/U-type busbar
Tightening torque	2.0N*m22In-Ibs
Mounting	35 mm
Connection	From top and bottom

CMT11-1 manual changeover switches are a unique solution for secure supply of power to your facility. They are available for single (25A, 40A or 63A) and three phase (40A or 63A) applications including the switching of generators.

The changeover switches connect the critical loads/ circuits, the main power grid, the generator or an alternate source.When manually operated, the power flowing to the critical loads/circuit changes from either the main power grid or generator, preventing back feed into each other

Wiring Diagrams for the use of changeover switches (I-0-II) with stand-by generators Stand-by generator or Alternative supply generator: typical location of manual changeover device with
centre "off" position in the main switch board.

The incoming changeover must be protected with an appropriate MCB 63A - 6kA - C curve to protect against short circuit and disconnection.

NOTE 1: In Australia and NZ, the Main Supply Neutral upstream of the MEN connection is NOT allowed to be switched. (AS/NZS 3010: Electrical installations - Generating sets).

NOTE 2: Refer to AS/NZS 3000, 3010 and local Service and Installation Rules for specific requirements.
Q1. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.We'll show you the photos of the products and packages before you pay the balance. Or we could do L/C as you want.

Q2. How about your delivery time?
A: Generally,it will take 3 weeks after receiving your advance payment.The specific delivery time depends on the items and the quantity of your order.

Q3. What is your sample policy?
A: Sample is available ,but sample should be pay in advance. The cost of sample will be refund after further order.

Q4. Do you test all your goods before delivery? Any quality guarantee or after-sales service?
A: Yes, we have 100% test before delivery. All the products have 5-10 years' Guarantee. If any quality complaint , we will give out solution within 5 days.